New Features

(1) Widely used at warehouse and factories

(2)16 wired zones and 16 wireless zones available

(3)Hierarchical code setting for different authorized management

(4)16 Relay output maximum ,link to other home appliance

(5)Auto re-dialing function in case of communication failure

(6)Auto force to hang up the on-line call if phone line is occupied

when alarm triggered ,it will auto dial to phone numbers which have been preset.

(7)20s user-defined voice can be recorded in the panel,it will auto replay the voice to user whose phone number in the alarm list when alarm triggered.

(8)SOS button for emergency

(9)There is built-in siren in panel ,with 1 wired & wireless siren output

(10)8 remote controllers maximum, each / a few of them  is independently controlled by different users with different passwords.

(11)Arming /disarming status can be reported to user or your local CMS.

(12)A group of normal open/closed alarm reply output, different alarm events will drive relay to automation appliance

(13)8 groups of alarm phone numbers can be set maximum.

(14)Support for ADEMCO contact ID protocol

(15)48 detectors max for wireless zone

(16)8 partitions can be programmed independently, with 8 users codes controlled.

(17)4 arming/disarming timers can be set based on weekdays and weekends

(18)with Programming Key, it can copy all programming settings from one panel to other host panels.

(19)AC and battery power status can be reported to user

(20)Low battery prompt/alarm of  overdischarge protection in case of battery damage,

power with either 220V or 12V/7AH storage battery,

(21)100 history records can be restored.

(22)Optional GSM module,dual-network (PSTN+GSM) available,it will auto switch to GSM (or PSTN)if PSTN (or GSM) fails.

(23)Zone name can be edited by user.

(24)4 bands frequency :850mhz,900mhz,1800hmz,1900mhz

(25)Different modules extensible or added.