Powered by Solar
|Material:||ABS+ Metal + Magnet|
|Size:||dia.100 x 34mm height|
|LED:||12 ultra-bright LEDs inside for White version, or with 12 RGB SMD 5050 LEDs for RGB version (Auto colour changing between Red, Green and Blue)|
|Battery:||3 x AA 1.2V 600MA NI-MH Battery|
High brightness, Very easy to use, and very ideal to decorate / illuminate your swimming pool ------ with two little magnets, very easy for the "Above-Ground Pool" with steel wall (just attach this item to the walls directly);
also easy for the other pools using our stainless ring, the screw & anchor,
and the self adhesive ring included inside the set.
*** Remarks: you can put this creative item anywhere as you like, it's a Multi functional solar light device.
*** China Patent Number: ZL 2014 2 0411895 3 / ZL 2014 3 0254735 8
How your Solar Powered Fixture Works
During the day, the solar panel converts sunlight into electri city and recharges the battery/batteries. At night, the light turns on automatically using the electricity stored during that day.The number of hours the light stays on depends on your geographical location, weather conditions and seasonal sunlight availability.
Place the solar light fixture in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the battery/batteries to charge fully and will reduce the hours of n ighttime lighting. The selected location should not be near nighttime light sources,
such as porch lights, street lights or pool lights, as these may cause the solar light to turn off prematurely.
1) Remove the multi functional solar led light from packaging .
2) Place the solar light in a very sunny place and charge it for 8 hours.
3) Place the solar light in a very dark place or even in the water on the wall of the pool.
4) press the (ON) . The light should illuminate.
The Multi functional solar LED light is designed to turn on automatically in the dark when the button (on) is pressed.
Note: If the solar panel is placed in the sun it goes into charging mode automatically .
NOTE : If the light does not turn on try a darker place.
Installation for above ground pool
If you have an above ground pool with steel wall , you just have to place the light in the water against the pool wall at about 20 to 30 cm Max . The magnet of the solar led light is designed to adhere to the wall of the pool , so you have no installation to do.
See Fig (1)
Note: For a more robust grip , place the stainless ring on the outside wall of the pool towards the light. The stainless ring double the adherence .
Installation other than above ground pool.
Use the ring stainless provided with your light.
Using an electric drill , drill a hole for receiving the anchor provided in the package. Insert the anchor into the hole .
fix the stainless steel ring using the screw provided in the package.
Note : You can also use the self adhesive ring(foamed tape) for better installation.of the solar led light.
See fig (2)
solar led light--ring stainless--sticky ring--wall
（Remark：Use screw & anchor when you need）
Our Certificat & Patent