solar collector

The heat pipe solar thermal collector can be used for individual villa and commercial project, with EN12975 & solar key mark approvals

Dongbao Series 18 pipes...High heat absorption rate: full glass evacuated solar collector tubes applied, high vacuum degree interlayer, and excellent heat insulation effect...

Suitable for each factory, heat pipe can worked normally under very low environment temperature... history 2.) With heat pipe Collector 3.) Work even if some tubes are broken 4.) Flat panel solar water heater system 5.) Solar keymark,CE, ISO9001, CCC...

The evacuum tube solar collectors can be used for large heating project, which is very high effiency and economical

Anti-freezing, resist wind and hail well. CE, solar keymark, SRCC approved. 24 hours automatic water supply. Indirect run, clean water

TheSolar Water Heater--Pressurized Flat Plate Solar Collector design is simple and easy to use.

Module design, arbitrary combination, which can meet the demand of large water consumption. Have got the SOLAR KEYMARK.

Heat Pipe Solar Collector SL-FTRG-1.8-30. Manifold casing material: Anodized aluminum.

There is no water in the vacuum tube, so the tube will not break in the winter....1. Solar radiation is absorbed by the solar tubes and converted into heat; heat pipes conduct the heat from within the solar tube up to the header...

All inside material we use high quality rose copper for flow passage, heat pipe hole connection. Using mineral wool and imported polyurethane foam for...  Solar Collector All inside material we use high quality rose copper for flow passage, heat pipe hole connection. Using mineral wool and imported...

Ideal for commercial solar water heating applications..The operation of the solar collector is very simple.

1.Use: Bathroom 2.Pressure: Pressurized 3.Circulation Type: Indirect / Closed Loop (Active) 4.Heating System: Thermosyphon (Passive)...Balcony type Solar Collector / wall fixing heat pipe solar thermal collector, Heat pipe solar collector, vacuum tube solar collector, flat panel...

1,CE certiication 2,over 10 years of warranty 3, high selective absorber coating... of pressurized flat plate solar water heater collector YJR-HG-1000   MODEL YJR-HG-1980 Copper Header Pipes(mm) 22*0.8 Copper Riser Tubes(mm) 10*0.7 No. Of Riser...

Sunlight is captured by the coated vacuum tubes which absorb the radiation as heat and conduct it through aluminum fins to the copper pipes..... A manifold on the top of the solar collector allows the working fluid (typically anti-freeze) to be pumped through all of the copper pipes in parallel...

Heat pipe solar collector is connected with existing heating supply device......

Minimum Order:1PC GMC Certificate

It's used with heat preservation water tank, solar power workstation and the pipe.

Pressure Solar Collector:Inner manifold material:Red copper channel,Outer shell material of manifold:Aluminium alloy

The products use heat-pipe to transmit heat energy, so easy to install,anti-freezing,non-explosive,bearing pressure 8bar,in harmony with the structure...Collector efficiency remains high even in chill conditions; No water in the vacuum tube, so the tubes can be anti-scale, non...

Suitable for each factory, heat pipe can worked normally under very low environment temperature... history 2.) With heat pipe Collector . 3.) Work even if some tubes are broken 4.) Flat panel solar water heater system 5.) Solar keymark,CE, ISO9001, CCC...

The heat pipe solar thermal collector can be used for individual villa and commercial project, with EN12975 & solar key mark approvals

High Quality Competitive Price Good Reputation Solar Collector Both at Home and Abroad CCC,CE,ISO,EN12976 OEM offered

This solar collector SCM-01's material is the same as SCM-01, only the appearance of manifold and insulation on manifold is different

Solar radiation is absorbed by the solar tubes and converted into heat; used for hospital, school project and so on.

Working condition: -40 centidegree to 300 centidegree. Adopt high quality heat pipe...Solar Collector Adopt high quality heat pipe Copper heat pipes for rapid heat transfer Easy plug-in installation Suitable for mains pressure water...

1, Solar Keymark approved 2, EN 12975-1,2 standard 3, Pressurized heat pipe solar collector 10 years warranty

TJSUN manifold solar collector is applicable to supply solar water for villa ,swimming pool ,house heating and so on.

This U pipe is seamed in an aluminum heat transfer fin in the interior of vacuum tube that transmits the heat from the interior tube to the U pipe....Using U pipe solar collector,has better appearance. Reliable and efficient twin-glass solar tubes. Copper U pipes for rapid heat transfer,no water...

Separated pressure solar water heater Use heat pipe for the heat conduction and can get a high heat absorbtion efficiency and rapid heat tra

Suitable for each country, heat pipe can worked normally under very low environment temperature...Used red copper Aluminum frame is very strong Heat pipe can worked normally under very low environment temperature. solar collector certificate solar...

The evacuum tube solar collectors can be used for large heating project, which is very high effiency and economical

Our solar systems have excellent corrosion-resist, heat-resist, heat-reflect, well coated and manufactured, beautiful snow shade

Solar radiation is absorbed by the solar tubes and converted into heat; heat pipes conduct the heat from within the solar tube up to the header pipe

Stable solar conversion throughout the day (tubes passively track the sun)

TJSUN manifold solar collector is applicable to supply solar water for villa ,swimming pool ,house heating and so on.

Non-pressure solar water heater relies on the different density of cold water and hot water.

Suitable for each factory, heat pipe can worked normally under very low environment temperature... history 2.) With heat pipe Collector. 3.) Work even if some tubes are broken 4.) Flat panel solar water heater system 5.) Solar keymark,CE, ISO9001, CCC...